Proven 35 Wind Turbine
Proven35
Feed-In Tariffs paying around £9000 per year from 15kW Proven
 Now comes with a 5 Year warranty
|
| MODEL |
Proven 35 (15kW) |
| Cut In (m/s) |
2.5 |
| Cut Out (m/s) |
None |
| Survival (m/s) |
70 |
| Rated (m/s) |
12 |
| Rotor type |
Down wind (self regulating) |
| No. of Blades |
3 |
| Blade Material |
Glassthermoplastic Composate |
| Rotor Diameter (m) |
9 |
| Generator type |
Brushless, Direct drive, Perminent Magnet |
| Annual Output |
15000 - 30000 kWh |
| Head Weight (kg) |
1100 |
| Mast Type |
Tilt up, tapered, self supporting, no guy wires |
| Hub Height (m) |
15, 20, 25 |
| Noise @ 5m/s |
48dBA |
| Noise @ 12m/s |
65dBA |
| Rotor Thrust (kN) |
26 |
Electrical Layout The electrical layout consists three 6kW inverters totaling 18kW of capacity. This allows production to exceed 15kW in higher winds. The control panel has a Voltmeter and Ammeter to show wind turbine electrical output & a rotary isolator to isolate the turbine output (lockable in the 'off' position). We install a Kilo Watt Hour (kWh) meter which records the total production from the turbine. This kWh meter can be used for ROC (Renewable Obligation Certificate) or FIT (feed In Tariff) payment. The electrical system fits onto an eight foot by four foot woodern board. |
|
Mechanical Mechanism The P35 (15kW) uses a damper system to acurately control the blade pitch and rotational speed control. This spring and damper mechanism prevents gusts and uneven winds from causing an unbalancing of the blades. The Proven7 (3.2kW) & Proven11 (6kW) do not require a damper system as their rotational speed is higher and their blades are much shorter. |
|
For any more technical documents please go to the Downloads page.