G59 Control Panel
Turbine Services TSG59Pro control panel.
The TG59Pro is used in grid connecting embedded generation schemes to protect against:
Voltage change - Under and over 240V
Frequency change - Under and over 50Hz
Vector shift - 1deg increments
This panel is; Width300mm, Height400mm, Depth200mm
For systems that generate in excess of 16Amps per phase, G59 regulations are employed in the UK. The TSG59Pro control panel has a lid mounted G59 relay complete with LCD readout, which automatically disconnects the embedded generator from the national grid upon a mains fault using a large 3-phase contactor. A door interlock rotary isolator adds protection and allows a user to manually disconnect their embedded generation system.
Comes with 4x 20mm holes in the gland plate for easy connection on site. A light is mounted along side the G59 relay giving the user a quick indication as to whether the system is grid connected or not.
The TSG59Pro is used to protect against:
Voltage change - Under and over 240V
Frequency change - Under and over 50Hz
Vector shift - 1deg increments
|
 |
|
G59 Pro (with kWh meter). Panel size is 400 x 600 x 200 |
| |
|
These panels are often used for the Proven 15kW grid connect wind turbines, and can be used in conjunction with the TS15000 control panel.
Upon ordering we require the following information, 1-phase or 3-phase system & maximum kW rating required
Retail price £1495. ex VAT + Del, this price may vary if a larger contactor is required (to carry more amps).
For technical drawing please see the 'control panel section in our 'Downloads' page (located in the top right corner of the website).
The G59 panel can be used for any embedded generation system as can be seen in the picture below.
Positional Diagram
Basic Electrical Layout of G59 Pro Control panel
