|
Turbine
Services TS6000 (suitable for Proven 6kW grid connect
wind turbines): |
 |
- Dimensions W H D,
300x400x200mm
- Mains isolator
(rotary, lockable in the off position)
- Wind Turbine
isolator (rotary, lockable in the off position)
- 3-phase rectifier
(60Amp rating)
- Volt meter
(analogue, easy to read)
- Ammeter (analogue,
easy to read)
- DC cartridge fuse
(complete with spare fuse).
- Door interlock for
added safety (switch off to open)
- Pre drilled gland
plate (4 x 20mm)
|
|
|
Turbine
Services TS15000 (suitable for Proven 15kW grid connect
wind turbines): |
 |
- Dimensions W H D,
300x400x200mm
- Wind Turbine
isolator (rotary, lockable in the off position)
- 3-phase rectifier
(60Amp rating)
- Volt meter
(analogue, easy to read)
- Ammeter (analogue,
easy to read)
- DC cartridge fuse
(complete with spare fuse).
- Door interlock for
added safety (switch off to open)
- Pre drilled gland
plate (4 x 20mm)
|
|
|
Turbine
Services TSSE1500/48 (suitable for small water turbines,
up to 10kW @ 24V or 48V): |
 |
- Dimensions W H D,
300x400x200mm
- Water Turbine
isolator (Latching in the off position)
- 3-phase rectifier
(if required)
- Volt meter
(analogue, easy to read)
- Ammeter (analogue,
easy to read)
- DC cartridge fuse
(complete with spare fuse).
- Pre drilled gland
plate (4 x 20mm)
|
|
|
Turbine
Services custom control panel. |
 |
We design and build
control panels for all manner of systems. The
control panel shown here is for a 3-ph water turbine,
off-grid system.
Please
contact us if you would
like to enquire about us designing, building or
installing control panels.
|
|
|
Turbine
Services TSG59Pro control panel. |
 |
For systems that generate
in excess of 16Amps per phase, G59 regulations are
employed. The TSG59Pro control panel has a
lid mounted G59 relay complete with LCD readout, which
automatically disconnects the embedded generator from
the national grid upon a mains fault using a large
3-phase contactor. A door interlock rotary isolator adds
protection and allows a user to manually disconnect
their embedded generation system. Comes with 4x
20mm holes in the gland plate for easy connection on
site. A light is mounted along side the G59 relay
giving the user a quick indication as to whether the
system is grid connected or not. Protects against
- Voltage - under
and over
- Frequency - under
and over
- Vector shift -
1deg increments
These panels are often
used for the Proven 15kW grid connect wind turbines, and
can be used in conjunction with the TS15000
control panel. |
|
| |
|
| |
|
